Rust-oleum
v2100 system enamel aerosol

Rust-Oleum® High Performance aerosols are available in high-gloss, semi-gloss, flat, metallic and fluorescent finishes. They apply easily and dry fast to a tough, attractive corrosionresistant finish featuring superior coverage, color, and gloss retention and resist chipping, cracking and peeling. They are available in a variety of colors including safety and fluorescent colors, and many match popular Rust-Oleum® Industrial Enamel gallon colors for easy touch-ups.

Primer aerosols are used for maximum corrosion protection on clean, rusted or previously painted metal. They are fast dry, quick recoat rust inhibiting primers designed for use with the Rust-Oleum® High Performance Industrial Enamel aerosols to optimize corrosion control.

Cold galvanizing aerosols are zinc-rich coatings that provide maximum corrosion resistance through galvanic protection. Use for touch-up and repair to damaged galvanized steel; production welds, galvanized ducts, storage tanks, fences, gutters, trucks, trailers, off-shore drilling rigs, utility towers, and more. Do not topcoat with an alkyd finish.

COLOR MODEL NO. BDS PART NO.
BRIGHT GREEN V2134838 T0634
BRIGHT RED V2164838 T0664
CHESTNUT BROWN V2175838 T0675
DARK GREEN V2137838 T0637
DARK MACHINE GRAY V2187838 T0687
DEEP BLUE V2125838 T0625
EQUIPMENT ORANGE V2156838 T0656
EQUIPMENT YELLOW V2148838 T0648
FLAT BLACK V2178838 T0677
FLAT WHITE V2190838 T0690
FLEET WHITE V2196838 T0696
FLUORESCENT GREEN 2233838 T0733
FLUORESCENT ORANGE 2255838 T0755
GLOSS BLACK V2179838 T0679
GLOSS WHITE V2192838 T0692
HUNTER GREEN V2138838 T0638
INDUSTRIAL YELLOW V2147838 T0647
LIGHT BLUE V2123838 T0623
LIGHT MACHINE GRAY V2183838 T0683
SAFETY BLUE V2124838 T0624
SAFETY GREEN V2133838 T0633
SAFETY ORANGE V2155838 T0654
SAFETY RED V2163838 T0662
SAFETY YELLOW V2143838 T0643
SEMI-GLOSS BLACK V2177838 T0667
SILVER ALUMINUM V2115838 T0615
TAN V2171838 T0671
GRAY PRIMER V2182838 T0682
RED PRIMER V2169838 T0669
WHITE PRIMER 209566 T0802

 

Link to Color Chart, MSDS/TDS

Email or Call 1-800-282-8378 for Pricing
Rust-Oleum
7400 Direct-to-metal alkyd enamel

7400 System DTM 450 VOC Alkyd Enamels are designed for indoor and outdoor steel surfaces in mild to moderate industrial environments. Excellent resistance to general weathering, salt air, mild chemical fumes and light abrasion. Available in high gloss, semi-gloss, flat, and metallic finishes. Not for use on galvanized steel.

If desired, the 7400 System DTM 450 VOC Alkyd Enamels can be applied direct-to-metal (DTM), however optimal corrosion protection is achieved when the finish coat is used in conjunction with one of the recommended primers.

Semi-gloss finishes are designed for interior and sheltered exterior surfaces only. Metallic finishes #470402 and #473402 may also be used on surfaces subject to heat in the temperature range of up to 350°F (176°C). Use over #X-60402, #3469402 or #7669402 red primers.

COLOR MODEL NO. BDS PART NO.
ALUMINUM 470402 T0038
CHESTNUT BROWN 977402 T0171
DUNES TAN 865402 T0105
FIRE HYDRANT RED 1210402 T0200
FLAT BLACK 412402 T0032
FOREST GREEN 1283402 T0205
HEAVY ALUMINUM 473402 T0040
HIGH GLOSS BLACK 634402 T0056
INTERNATIONAL ORANGE 559402 T0042
MACHINE TOOL GRAY 904402 T0122
NATIONAL BLUE 721402 T0077
NAVY GRAY 975402 T0165
SAFETY BLUE 925402 T0132
SAFETY GREEN 933402 T0143
SAFETY ORANGE 956402 T0153
SAFETY YELLOW 944402 T0148
SILVER GRAY 906402 T0124
VISTA GREEN 935402 T0145
YELLOW 7446402 T0067

 

Link to Color Chart, MSDS/TDS

Email or Call 1-800-282-8378 for Pricing
Rust-Oleum
9100 Low voc direct-to-metal epoxy

A two-component, high solids epoxy coating for use in
moderate to severe environments. It is specifically designed
for application directly on sound rusted steel with minimum
surface preparation. It can also be used on clean steel,
galvanized metal, concrete (including concrete floors),
previously coated and slightly damp surfaces. It may also be
used for water immersion service, using High Performance
Industrial DTM Epoxy Mastic standard premix bases only with
9102402 Immersion Activator. (Note: Do not use for immersion
service in potable water tanks). High Performance Industrial
DTM Epoxy Mastic can be used indoors or out. While exposure
to sunlight and certain interior lighting conditions causes fading
and chalking of all epoxy type coatings, these changes are
cosmetic in nature only and film integrity and performance will
not be adversely affected.

Link to Color Chart, MSDS/TDS

Email or Call 1-800-282-8378 for Pricing
Rust-Oleum
9400 High Gloss Polyester Urethane

A two component, polyester polyurethane with a super high-gloss finish. This coating system has two different activators to meet the specific requirements set by national air quality regulations. The 9401 Activator is used to meet the VOC requirements of the automotive refinishing rule. The 9401 Activator does not meet the VOC requirements for industrial maintenance painting. For industrial maintenance painting, use only the HS9401 Activator which has been formulated to meet the reduced VOC levels established for this market.

When using the 9401 Activator, this highly durable, high gloss enamel is designed for coating mobile equipment used in an aggressive environment. The coating has excellent chemical resistance and excellent color and gloss retention making it ideal for outdoor equipment such as ready-mix concrete trucks, bulk haulers, tank wagons, cranes, and other mobile equipment.

When using the HS9401 Activator, this high performance polyurethane has excellent chemical resistance and excellent color and gloss retention. It is suitable for use in severe coastal, offshore, or chemical environments where both corrosion protection and aesthetics are very important. Ideal for exposed structural steel, tanks, conveyors, and other tough maintenance applications.

Link to Color Chart, MSDS/TDS

Email or Call 1-800-282-8378 for Pricing

Click here to Visit our eCommerce catalog